Products

Bayco Products’ SL-1530 LED WORK LIGHT offers 10,000 lumens of brightness and dual light fixtures that can be directed independently of each other, allowing users to position each fixture exactly where light is needed. The two side-by-side LED fixtures are attached to the base unit can be removed easily from the tripod stand and placed on the floor for low-angle illumination.

The included eight-foot tripod stand extends the dual fixtures up to eight feet off the ground for the largest projects. Each work light fixture has a tempered glass lens and is powder-coated for long wear and durability with a multifin heat sink design, keeping each fixture cool to the touch. www.mybayco.com. (800) 233-2155.

Coxreels’ 300 SERIES EXHAUST HOSE REELS are designed to enable the extraction of exhaust fumes directly from the source of their emission and maintain the safest workplace air quality. Coxreels exhaust reels conveniently store lengths of large diameter exhaust hose and mount to any wall, overhead, and floor position.

The heavy-duty frame on Coxreels exhaust reels is built to provide strength, durability, and stability. The components are individually powder-coated, providing excellent resistance in any environment. They also feature a panel to easily access the main drum, where the internal ducting is included. www.coxreels.com. (800) 269‐7335.

Ajax Tool Works, Inc.’s EXTRICATION TOMAHAWK works as 10 tools in one. Features include a hardened point for breaking glass, making purchase points in laminated glass, tire punching, and making strut insertion points in body of vehicle. It also features a pry bar for making purchase points in door, hood, and trunk seams for hydraulic tool insertion; prying off hatch and trunk gas struts; and as a gas shutoff valve wrench.

Use the flat surface for hammering in cribbing and wedges or for striking surface for driving point into objects. Additional features include a glass notch/antenna remover. www.ajaxrescuetools.com. (800) 323-9129.

The Harrison HYDRA-SKID SHORT-BED BRUSH KIT PACKAGE is developed to work with any of the Ford F-Series chassis factory ordered with a Ford Live Drive Power Takeoff provision and using a Harrison Hydra-Drive. The HYDRA-SKID harness the power of the Harrison IHT-HQ system to deliver an incredibly compact package for powering up your 150-gpm water pumps in stationary or in true NFPA “Pump & Roll” conditions.

Simplified operation is achieved and any speed with the flick of a switch. Features a 10-percent shorter wheel base, a 20-precent shorter box length, a 20-percent lower chassis cost, and 25-percent more water capacity. www.harrisonhydragen.com/. (800) 723-3334.

Oval Brand Fire Products’ FIRE EXTINGUISHERS are world’s slimmest high-performance ABC and Purple K Dry-Chemical fire extinguishers. Compliant with protruding-object requirements-an oft-ignored section of the Americans with Disabilities Act-they are as much as 40 percent slimmer than traditional, five- and 10-pound round extinguishers, helping alleviate problems for architects and designers as well as building owners and operators.

Because they’re slim, they fit within standard-width walls without needing a protruding cabinet. When mounted to a surface, they’re also less likely to be bumped by passers-by and therefore less prone to fall, potentially causing injury or damage to the unit. http://ovalfireproducts.com. (630) 635-5000.

DEStech Publications, Inc.’s STRUCTURES IN FIRE 2016 offers original research on the fire behavior of building components made from concrete, steel, composites, glasses, and timber. Its 135 chapters, written by researchers from 26 nations, contain key technical information on how fire affects widely used construction materials in multiple configurations.

Attention is placed on new testing and modeling approaches as well as on structural health monitoring and strategies for protection. The findings in this book will be of benefit to design and fire safety engineers. www.destechpub.com/product/structures-fire-2016. (877) 500-4DES.

IntelliMon’s FiRST™ (Firefighter Rescue and Support Technology®) is an intelligent monitoring system developed to improve the safety and operational effectiveness of firefighters in action. It’s comprised of electronics connected to thermal sensors which use artificial intelligence to analyze the rapidly changing temperatures in a smoke-filled contained fire environment where firefighters frequently operate.

It is encased in ruggedized housing and mounted on to a firefighter’s breathing apparatus as a core component in firefighting equipment. Unlike simple threshold-based temperature sensors, FiRST™ is far more sensitive and intuitive and predicts a flashover much more rapidly, providing firefighters with vital time to react accordingly. www.IntelliMon.co.uk.

Workrite Uniform Company’s FLAME-RESISTANT (FR) CLOTHING is developed by women for women in industrial and fire service professions. Available for purchase from industrial distributors and qualified resellers, the updated Workrite® FR and Workrite® FR Fire Service women’s lines now include shirts with vertical darts in the front and contoured seams in the back.

Additionally, the women’s lines offer pants featuring a lower rise and more tailored fit in the waist, seat, and thighs. Workrite Uniform’s updated women’s lines are built to address these potential concerns with the backing of a 40-year history in quality FR manufacturing and a more customized, comfortable fit. www.workrite.com. (800) 521-1888.