New Multi-Use Forcible Entry Tool

New Multi-Use Forcible Entry Tool

A new, lightweight forcible entry tool has been designed by Hugh A. Halligan, Deputy Chief of the New York Fire Department, which possesses new and original features. It is said to combine attributes of the utilitarian, standard claw tool, and the efficient Kelley tool as well as certain advantages of the ubiquitous pike, or hook, and flat-head axe.

The device weighs only 8 1/2 pounds and measures 30 inches in length, it has a forked spade, like a claw tool, at one extremity, and a sharp, pointed hook and an edged blade at the other.

Deputy Chief Holligan Displays New Forcible Entry Tool Veteran New York officer invents tool that performs many operations of regulation claw and Kelley tools, axe, pike and punch.One of a number of applications. All door-forcing movements are in the area of the door itself so that a door which might be set between two partitions could still be easily opened.

During his eighteen years in the department, Chief Halligan has specialized in forcible entry and ventilation operations and the new tool grew out of his own practical experiences and those of the men under his direction. His main objective was to devise an instrument that, while possessing the correct physical and mechanical principles, would minimize the possibility of injury to the user. Chief Halligan had seen many men hurt while using the old-style claw tool, due to striking the curved end of the claw and hitting off center.

The “Halligan tool” can be used for cutting, lifting, twisting, prying and wedging. It is claimed that its use for lifting skylights, scuttles and for fore ing doors and locks is practically unlimited. It may be adapted for both the comparatively light work of residential and multiple-dwelling districts, and for heavier work encountered in industrial and commercial occupancies, by simply varying the tool proportions in scale.

The shaft of the tool is grooved to facilitate its grip by the operator. There are two grooves on the inside of the hook to prevent slipping when used on locks, and two on the outside to prevent slipping on wet wood. The head is so designed as to afford almost complete protection to the hands, arms and body of the user. After penetration of the claw is made and while the opening and spreading effect of the tool is being exerted, the hook end becomes a firm grip to steady the tool, facilitating movement of the free hand upward to apply maximum pressure. Upon completion of the forcing motion, the “axe” blade affords protection to the hands of the user.

It is reported that the Halligan tool has received a lengthy and practical workout in the New York Fire Department.

RELATED

 Mike Ciampo on The Halligan

The Ins and Outs of the Halligan: Chief and His Ugly Bar

The Ins and Outs of the Halligan: There Are Many Halligans But This One Is Mine

The Ins and Outs of the Halligan: Levers Can Move Mountains

 

 

 

Hand entrapped in rope gripper

Elevator Rescue: Rope Gripper Entrapment

Mike Dragonetti discusses operating safely while around a Rope Gripper and two methods of mitigating an entrapment situation.
Delta explosion

Two Workers Killed, Another Injured in Explosion at Atlanta Delta Air Lines Facility

Two workers were killed and another seriously injured in an explosion Tuesday at a Delta Air Lines maintenance facility near the Atlanta airport.